– 84 – NWA-008845-001 Rev.5.0
32ch1002.fm
ATTENDANT OVERRIDE
PROGRAMMING
DESCRIPTION DATA
Provide the system with ATTENDANT
OVERRIDE.
(1)
(2)
012
1 : Available
Specify the interval of the Warning Tone sent
to the connected parties.
(1)
(2)
045
0: Only once
1 : Every 4 seconds
Specify whether the Warning Tone is sent to
the outside party.
(1)
(2)
076
0: To send
1: Not sent
Assign Service Restriction Class A to each
station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Attendant Override called side in the
Service Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=09
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Individual Trunk
Access.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A081: Individual Trunk Access
Assign the Trunk Identification Code to each
trunk.
NOTE: By loading the Resident System
Program, Trunk Identification
Codes are assigned as follows:
1XXX
XXX: 000-255 (Trunk number)
•
(1)
(2)
Y=19
000-255: Trunk No.
XXXX: Trunk ID Code
START
CM08
CM12
CM15
CM20
CM30
A
ATTENDANT OVERRIDE
To Next Page
Loading...