– 240 – NWA-008845-001 Rev.5.0
32ch1004.fm
CONSECUTIVE SPEED DIALING
PROGRAMMING
To provide Consecutive Station Speed Dialing from Single Line Telephone or D
term
:
DESCRIPTION DATA
Assign Service Restriction Class A to each
station.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Station Speed Dialing in the Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=07
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign access codes for Station Speed
Dialing, Origination, Entry and Cancel,
respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (#*, 7*, 7#)
A064: Origination
A065: Entry
A066: Cancel
Specify whether to provide Toll Restriction for
an outgoing call by Station Speed Dialing.
(1)
(2)
035
0: Not provided
1: Provided
Specify whether to set “#” dialing as paused
data (1.5 seconds) or dialed digit when the
DTMF station or D
term
dials “#” in the setting
of the Station Speed Dialing feature.
(1)
(2)
168
0 : Paused data (1.5 seconds)
1 : Dialed digit
Specify “*” dialing is set as programmable
pause by CM41 Y=0>38 or dialed digit when
the DTMF station or D
term
dials “*” in the set-
ting of the Station Speed Dialing feature.
(1)
(2)
171
0 : Programmable pause by CM41
Y=0>38
1:Dialed digit
START
CM12
CM15
CM20
CM08
A
CONSECUTIVE SPEED DIALING
To Next Page
Loading...