– 716 – NWA-008845-001 Rev.5.0
32ch1011.fm
TRUNK-TO-TRUNK CONNECTION
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class C to each sta-
tion.
•
(1)
(2)
Y=07
X-XXXXXXXX: My Line No.
00-15 : Service Restriction Class C
Provide the switch hook flash capability dur-
ing C.O. line connection, to the required sta-
tions.
•
(1)
(2)
Y=90, 91
00-15: Service Restriction Class C as-
signed by CM12 Y=07
1 : Allow
Specify the combination of trunk routes allow-
ing the Trunk-to-Trunk Connection.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63: Incoming trunk route
ZZ : 00-63: Outgoing trunk route
0 : Allow
1 : Restricted
Provide the system with Ring Transfer for Call
Transfer-All Calls to a trunk when a station
holds another station or trunk.
(1)
(2)
253
0: Available
Provide the system with forced release when a
tandem call duration passes a predetermined
time.
(1)
(2)
029
0 : To disconnect
1 : To continue
Allow or restrict forced release of tandem con-
nection for the incoming trunk route.
This data is available when CM08>029 is set
to 0.
•
(1)
(2)
Y=119
00-63: Trunk Route No.
0 : Allow
1 : Restricted
Specify the forced release timing for tandem
call.
•
(1)
(2)
Y=0
54
01-06: 64-224 minutes
(32 minute increments)
If no data is set, the default setting is 96-128
minutes
START
CM12
CM15
CM36
CM08
CM35
CM41
A
TRUNK-TO-TRUNK CONNECTION