Philips Sopho 2000 IPS - Miscellaneous Trunk Access; Ccsa Access

– 480 – NWA-008845-001 Rev.5.0
32ch1008.fm
MISCELLANEOUS TRUNK ACCESS
CCSA ACCESS
PROGRAMMING
In addition to the programming of Tie Lines, assign CCSA line to the required routes, as shown below.
HARDWARE REQUIRED
ODT card
DESCRIPTION DATA
Assign CCSA line to required routes. •
(1)
(2)
Y=00
00-63: Trunk Route No. (06)
03: CCSA line
Specify the ICI key, for Attendant Console, to
which a CCSA incoming call from the CCSA
network will terminate.
•
(1)
(2)
Y=15
00-63: Trunk Route No.
ICI key
30-37: CCSA Incoming Call 0-7
Assign the ICI key to the DESKCON, to which
a CCSA incoming call will terminate.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + key
No.
ICI key
F6030-F6037: Call Termination from
CCSA Line 0-7
Assign the CCSA access code. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (85)
100-163: Trunk Route No. 00-63 (06)
START
CM35
CM90
,
CM20
END
MISCELLANEOUS TRUNK ACCESS
CCSA ACCESS