– 752 – NWA-008845-001 Rev.5.0
32ch1011.fm
VOICE MAIL TRANSFER
To transfer a call from an Attendant to a VMS, if Camp-On is set to the transferred destination, and that is
not answered by predetermined timing:
DESCRIPTION DATA
Provide the system with VMS transfer. (1)
(2)
428: VMS transfer with Camp-On
0: To provide
Specify the timer of Attendant Recall for
Camp-On.
•
(1)
(2)
Y=0
00: Attendant Recall Timer
01-14: 2.4-33.6 seconds
(2.4 second increments)
15-24: 38.4-124.8 seconds
(9.6 second increments)
If no data is set, the default setting is 31.2-33.6
seconds.
Specify the destination VMS station number
when a Camp-On call is not answered.
The first data should be the tenant number of
the destination station called.
•
(1)
(2)
Y=18 Destination VMS No. assignment
00-63: Tenant No.
X-XXXXXXXX: VMS Pilot No.
START
CM08
CM41
CM51
END
VOICE MAIL TRANSFER
To Next Page
Loading...