– 327 – NWA-008845-001 Rev.5.0
32ch1006.fm
DISTINCTIVE RINGING
PROGRAMMING
[For North America]
(1) For Station-to-Station calls
(2) For C.O./Tie line calls (except for Direct-in Termination/Direct Inward Dialing/DISA/CCIS calls)
(3) For Direct-in Termination calls
DESCRIPTION DATA
Specify the interval of ringing tones for sta-
tion-to-station calls.
(1)
(2)
138
0 : 2 seconds ON-4 seconds OFF
1 : 1 second ON-2 seconds OFF
DESCRIPTION DATA
Specify the interval of ringing tones for station
on incoming calls.
NOTE: For incoming calls to a Trunk-Di-
rect Appearances key on D
term
s, the
special ringing; 0.2 seconds ON-0.2
seconds OFF will be applied.
•
(1)
(2)
Y=33
00-63: Trunk Route No.
0 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
1 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
2 : 1 second ON-2 seconds OFF
3 : 2 seconds ON-4 seconds OFF
DESCRIPTION DATA
Specify the interval of ringing tones for Direct-
in Termination calls.
(1)
(2)
179
0 : As per CM35 Y=33
1 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
START
CM08
END
START
CM35
END
START
CM08
END
DISTINCTIVE RINGING