– 566 – NWA-008845-001 Rev.5.0
32ch1009.fm
PROPRIETARY MULTILINE TERMINAL
PROGRAMMING
DESCRIPTION DATA
Assign the D
term
station number to the associ-
ated LEN.
NOTE 1: When DLC card is accommodated,
the D
term
station number must be as-
signed for the all lines of the card.
NOTE 2: When the following features are
used with PN-AP00-B with AP00
program, do not assign 5 or more
digits station number.
• SMDR/PMS
• Front Desk Instrument (D
term
)
(1)
(2)
000-763: LEN
FX-FXXXXXXXX: D
term
Station No.
X-XXXXXXXX represents My Line No.
Assign the D
term
station number to the associ-
ated LEN.
[Series 3200 R6.2 software required]
NOTE 1: When DLC card is accommodated,
the D
term
station number must be as-
signed for the all lines of the card.
NOTE 2: When the following features are
used with PN-AP00-B with AP00
program, do not assign 5 or more
digits station number.
• SMDR/PMS
• Front Desk Instrument (D
term
)
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
FX-FXXXXXXXX: D
term
Station No.
X-XXXXXXXX represents My Line No.
Allow the accommodation of Single Line
Telephone to D
term
multiline, if required (As-
signment for Single Line Telephone only).
•
(1)
(2)
Y=05
X-XXXXXXXX: Station No.
0: Accommodated
Assign the station numbers, trunk numbers or
service feature access keys on each D
term
, if re-
quired.
•
(1)
(2)
Y=00
My Line No. + + Key No.
Refer to Command Manual (CM90)
START
CM10
CM14
CM12
CM90
,
A
PROPRIETARY MULTILINE TERMINAL