Philips Sopho 2000 IPS - Page 585

– 567 – NWA-008845-001 Rev.5.0
32ch1009.fm
DESCRIPTION DATA
Specify the TAPI ADAPTER mode of D
term
.
[Series 3200 R6.1 software required]
NOTE 1: When using D
term
65 TAPI
ADAPTER on D
term
75, set “0”.
NOTE 2: When the TAPI ADAPTER is not
used, set “3”.
NOTE 3: For PN-2DLC/4DLC cards, this
data must be assigned to the first
LEN (Level 0) of each card.
For 8DLC cards, this data must be
assigned to the first LEN (Level 0)
and the fifth LEN (Level 4) of each
card.
•
(1)
(2)
Y=17
X-XXXXXXXX: My Line No.
0:D
term
65 TAPI ADAPTER on D
term
75
(D
term
Series E)
3 : Not used
Specify the kind of D
term
.
NOTE: After the 2nd data of CM12 Y=24 is
changed, pull out and reconnect the
modular connector of the D
term
.
•
(1)
(2)
Y=24
X-XXXXXXXX: My Line No.
0 : 24 Line/Trunk/Feature keys + 8/12
One Touch keys
7 : 16 Line/Trunk/Feature keys + 16/20
One Touch keys
Specify whether call termination on each line
key is indicated on the Call Indicator Lamp or
not.
•
(1)
(2)
Y=05
My Line No. + + Key No.
0 : Not indicated
1 : To indicate
Assign the Outgoing Call Preset/Answer Pre-
set functions to D
term
, if required.
(1)
(2)
145
0 : Available
1 : Not available
Specify whether the answer key rings on TAS
and Pooled Line or not.
(1)
(2)
116
0 : Available
1 : Not available
Specify the Delayed Ringing timing. •
(1)
(2)
Y=1
09
01-10: 2-20 seconds
(2 second increments)
If no data is set, the default setting is 10 seconds.
A
CM12
CM90
,
CM08
CM41
B
JANUARY/20/2006
PROPRIETARY MULTILINE TERMINAL