– 32 – NWA-008845-001 Rev.5.0
32ch1001.fm
ANNOUNCEMENT SERVICE
PROGRAMMING
To access the Digital Announcement Trunk (DAT card) from a station or C.O./Tie Line party:
DESCRIPTION DATA
Specify the Multiple Connections of the
Digital Announcement Trunk (DAT card) on
Announcement Service.
(1)
(2)
124
0 : Available
1 : Not available (Single Connection)
Assign a Digital Announcement Trunk number
to the required LEN.
NOTE 1: The Digital Announcement Trunk
number must be assigned to the first
LEN (Level 0), the third LEN (Level
2), the fifth LEN (Level 4) and the
seventh LEN (Level 6) of each LT
slot.
(1)
(2)
000-763: LEN
EB002-EB127: Digital Announcement
Trunk No.
For PIM0/1 : EB002-EB031
For PIM2/3 : EB032-EB063
For PIM4/5 : EB064-EB095
For PIM6/7 : EB096-EB127
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
Assign a Digital Announcement Trunk number
to the required LEN.
[Series 3200 R6.2 software required]
NOTE 1: The Digital Announcement Trunk
number must be assigned to the first
LEN (Level 0), the third LEN (Level
2), the fifth LEN (Level 4) and the
seventh LEN (Level 6) of each LT
slot.
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
EB002-EB127: Digital Announcement
Trunk No.
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NOTE 2: EB000 and EB001 are dedicated to
built-in Digital Announcement Trunk
of the MP card.
Assign Service Restriction Class A for An-
nouncement Service to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
START
CM08
CM10
CM14
CM12
A
ANNOUNCEMENT SERVICE
To Next Page
Loading...