– 562 – NWA-008845-001 Rev.5.0
32ch1009.fm
PRIORITY CALL
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A for Priority
Call to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Priority Call in Service Restriction
Class A assigned by CM12 Y=02.
•
•
(1)
(2)
Y=17 Priority Call 0
Y=18 Priority Call 1
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Priority Calls 0 and
1 respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A088: Priority Call 0
A089: Priority Call 1
Specify the destination for Priority Calls 0 and
1.
(1)
(2)
250: For Priority Call 0
0 : Same Station as Off-Hook Alarm
1 : Attendant Console
(1)
(2)
251: For Priority Call 1
0 : Same station as Off-Hook Alarm
1 : Attendant Console
If CM08>250/251 is set to “1”, assign the Pri-
ority Calls 0 and 1 to any Priority Call Keys on
DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6054: Priority Call 0
F6055: Priority Call 1
If CM08>250/251 is set to “0”, assign the des-
tination of Priority Calls 0 and 1 to the desired
station.
•
(1)
(2)
Y=12
00-63: Tenant No.
X-XXXXXXXX: Station No.
START
CM12
CM15
CM20
CM08
CM90
,
CM51
END
PRIORITY CALL
To Next Page
Loading...