– 832 – NWA-008845-001 Rev.5.0
32ch2001.fm
ROOM CUTOFF
PROGRAMMING
• When using PN-AP00-B with AP00 program
To provide the Room Cutoff by using Room Cutoff key of a Front Desk Terminal or PMS, do the following
programming in addition to the programming of “HOTEL/MOTEL FRONT DESK INSTRUMENT”
Page 800 or “PROPERTY MANAGEMENT SYSTEM INTERFACE” Page 821.
DESCRIPTION DATA
Specify the type of call to be restricted by
Room Cutoff.
(1)
(2)
232
0 : C.O. outgoing calls
1 : All outgoing calls
Specify whether Room Cutoff record is printed
out on Hotel Printer, and the report is sent to
PMS when setting or resetting Room Cutoff.
(1)
(2)
267
0 : Available
1 : Not available
Assign the destination of a call transferred
when the station in Room Cutoff condition di-
als outgoing access code.
•
(1)
(2)
Y=11
00-63: Tenant No.
X-XXXXXX: Station No.
or
E000: Attendant Console
Assign the Call Forwarding-Intercept (ICPT)
key, if the DESKCON is assigned as destina-
tion by CM51 Y=11.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6065: Call Forwarding-Intercept
Assign the function keys required for Room
Cutoff on the Front Desk Terminal.
NOTE: This data assignment is not required
when Room Cutoff is set by PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1065: Room Cutoff NOTE
F1074: Set
F1075: Reset
F1077: Release
Assign the function key required for Room
Cutoff on the DESKCON, if provided.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6100: Room Cutoff
F6104: Reset
START
CM08
CM51
CM90
,
,
,
A
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
ROOM CUTOFF
To Next Page
Loading...