Philips Sopho 2000 IPS - Analog Port Adapter

– 29 – NWA-008845-001 Rev.5.0
32ch1001.fm
ANALOG PORT ADAPTER
PROGRAMMING
To assign the Single Port Mode:
To assign the Dual Port Mode:
(1) Data Assignment for D
term
accommodates the Analog Port Adapter
DESCRIPTION DATA
Provide the Analog Port Adapter to the
required stations.
•
(1)
(2)
Y=32
X-XXXXXXXX: My Line No.
0: To connect
Assign the Single Port Mode to the required
stations.
•
(1)
(2)
Y=33
X-XXXXXXXX: My Line No.
1 : Single port mode
Specify whether a ringing signal is sent to the
analog terminal.
•
(1)
(2)
Y=35
X-XXXXXXXX: My Line No.
0: Not sent
1: To send
DESCRIPTION DATA
Provide the Analog Port Adapter to the
required stations.
•
(1)
(2)
Y=32
X-XXXXXXXX: My Line No.
0: To connect
Assign the Dual Port Mode to the required
stations.
•
(1)
(2)
Y=33
X-XXXXXXXX: My Line No.
0: Dual port mode
START
CM13
INITIAL
END
START
CM13
INITIAL
END
ANALOG PORT ADAPTER