– 302 – NWA-008845-001 Rev.5.0
32ch1006.fm
DID CALL WAITING
PROGRAMMING
DESCRIPTION DATA
Specify the Camp-On tone sent to a busy sta-
tion by Camp-On Call Waiting Method.
(1)
(2)
367
0 : Every 4 seconds
1: Only once
Assign Service Restriction Class A for the Call
Waiting feature to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Call Waiting Answer from called side in
Service Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=44 Call Waiting Answer from called
side
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the data for DID Call Waiting to the
trunk routes assigned by CM30.
•
(1)
(2)
Y=59 Call Waiting for DID call
00-63: Trunk Route No.
0: To provide
Specify Call Waiting for DID call per incom-
ing LDN number, if required.
NOTE: CM76 Y=10 is effective when the
2nd data of CM35 Y=18 is “0” (Re-
ceived Digits Conversion is to be
provided).
•
(1)
(2)
Y=10
000-999: Number Conversion Block No.
assigned by CM76 Y=00/90
0 : Restricted
1 : Allow
START
CM08
CM12
CM15
CM35
CM76
END
DIRECT INWARD DIALING (DID)
DID CALL WAITING
To Next Page
Loading...