– 381 – NWA-008845-001 Rev.5.0
32ch1007.fm
FAX ARRIVAL INDICATOR
PROGRAMMING
Hotlines or House Phone feature assignment is used to implement this feature.
The number of facsimile station numbers and facsimile call station numbers that can be assigned varies
with each of the following cases.
• When Hotlines-Inside/Outside are used, a maximum of 100 facsimile stations can be assigned. In ad-
dition, a maximum of 100 facsimile call stations can be assigned.
• When House Phone groups are used, a maximum of four facsimile stations can be assigned. In addi-
tion, there is no limit to the number of facsimile call stations that can be assigned to each facsimile
station.
(1) Hotlines
DESCRIPTION DATA
Assign the fax call station number. This num-
ber is used as the fax call indicator button on
the D
term
. Also this is the number to which the
incoming fax call is directed.
(1)
(2)
000-763: LEN
X-XXXXXXXX : Single Line Station
No.
FX-FXXXXXXXX: My Line No.
Assign the fax call station number. This num-
ber is used as the fax call indicator button on
the D
term
. Also this is the number to which the
incoming fax call is directed.
[Series 3200 R6.2 software required]
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
X-XXXXXXXX : Single Line Station
No.
FX-FXXXXXXXX: My Line No.
Assign a virtual number to be used as a fax call
station number. (Similar to CM10/CM14
above but using a virtual extension instead of a
real station number.)
(1)
(2)
000-255: Virtual LEN
[Series 3300 software or before]
0000-1019: Virtual LEN
[Series 3400 software or later]
X-XXXXXXXX: Virtual Extension No.
Assign the function of fax call station to the
station or extension assigned above in either
CM10/CM14 or CM11.
•
(1)
(2)
Y=29
X-XXXXXXXX: Station No.
0 : Fax call station
1 : Ordinary station
START
CM10
CM14
CM11
CM13
A
FAX ARRIVAL INDICATOR
To Next Page
Loading...