– 382 – NWA-008845-001 Rev.5.0
32ch1007.fm
(2) House Phone
DESCRIPTION DATA
Assign the fax call station and fax station using
Hotlines feature.
•
(1)
(2)
Y=00-99
0: Fax Call Station (calling side)
This is the extension to which the call is
directed and will be the fax call indicator
on the D
term
.
X-XXXXXXXX: Station No.
(1)
(2)
1: Fax Station (called side)
This is the actual single line port to be
connected to the facsimile machine.
X-XXXXXXXX: Station No.
Specify the accommodation of the fax call sta-
tion to the D
term
.
NOTE: This command needs to be set when
assigning a single line station as a
fax call station number by CM10/
CM14.
•
(1)
(2)
Y=05
X-XXXXXXXX: Fax Call Station No.
0 : Accommodated
1 : Not accommodated
Assign the fax call station number as the arriv-
al indicator to the D
term
.
•
(1)
(2)
Y=00
My Line No. + + key No.
X-XXXXXXXX: Fax Call Station No.
DESCRIPTION DATA
Assign the fax call station number. This num-
ber is used as the fax call indicator button on
the D
term
. Also this is the number to which the
incoming fax call is directed.
(1)
(2)
000-763: LEN
X-XXXXXXXX : Single Line Station
No.
FX-FXXXXXXXX: My Line No.
Assign the fax call station number. This num-
ber is used as the fax call indicator button on
the D
term
. Also this is the number to which the
incoming fax call is directed.
[Series 3200 R6.2 software required]
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
X-XXXXXXXX : Single Line Station
No.
FX-FXXXXXXXX: My Line No.
A
CM52
CM12
CM90
,
END
START
CM10
CM14
A
FAX ARRIVAL INDICATOR
To Next Page
Loading...