– 565 – NWA-008845-001 Rev.5.0
32ch1009.fm
PRIVATE LINES
PROGRAMMING
When providing Private Lines for a single line or D
term
, do the following Trunk-Direct Appearances pro-
gramming.
DESCRIPTION DATA
Assign the trunks to be seized on a per-station
basis.
•
(1)
(2)
Y=16
X-XXXXXXXX: Station No.
D000-D255: Trunk No.
Specify the designated seizure of trunks on a
per-trunk route basis.
•
(1)
(2)
Y=98
00-63: Trunk Route No.
0 : Private Lines
1 : No Private Lines
Specify the number of times to hunt through
the trunks within the trunk route.
(1)
(2)
08
01-16 : One time-16 times
NONE : Not Seized
If data is not set, the default setting is 00 (no sei-
zure when the designated trunk is busy). To as-
sign default setting, assign “CCC”.
START
CM12
CM35
CM42
END
PRIVATE LINES
To Next Page
Loading...