– 233 – NWA-008845-001 Rev.5.0
32ch1004.fm
GROUP CALL
Group Call includes three kinds of conference: Group Call-Automatic Conference, Group Call-Broadcast-
ing, and Group Call-Two Way Calling.
Do the following programming in addition to the Conference Trunk Assignment ( Page 228).
DESCRIPTION DATA
Assign the participant numbers (not including
the conference leader) for each conference
group.
NOTE 1: Assign the following participant
numbers as the first data.
8-Party Conference: 00-06
16-Party Conference: 00-14
32-Party Conference: 00-30
NOTE 2: C (fixed pause), D (programmable
pause) can be assigned.
NOTE 3: The maximum number of simulta-
neous calling for single line
stations/PSs is 12 per FP. When the
number of single line stations/PSs
exceeds 12, allocate the rest of
participant stations to another FP.
For a D
term
(My Line/Virtual Line),
there is no limit of the above.
•
(1)
(2)
Y=00-07 Group No. 0-7
00-30: Participant No. NOTE 1
X-X....X:
Participant Station No.
Trunk Access Code + Participant No.
LCR Access Code + Participant No.
Maximum 16 digits NOTE 2
Assign a Numbering Plan Group number to
each tenant.
(1)
(2)
00-63: Tenant No.
710-713: Numbering Plan Group 0-3
Assign the access code for LCR Group 0-3. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
START
CM57
CM29
CM20
A
CONFERENCE (32-PARTY)
GROUP CALL
To Next Page
Loading...