– 604 – NWA-008845-001 Rev.5.0
32ch1010.fm
SET RELOCATION
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A for Set Re-
location to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Set Relocation (Setting Side). •
(1)
(2)
Y=131
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0: Allow
Allow being moved and changed by Set Relo-
cation operation.
•
(1)
(2)
Y=132
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0: Allow
Allow Authorization Code operation after op-
erating trunk call originating in Service Re-
striction Class A assigned by CM12 Y=02.
[Series 3900 software required]
•
(1)
(2)
Y=401
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0 : Allow
7 : Restricted
Assign the access code for Authorization
Code.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A086
Set the Authorization Code for Service Re-
striction Class A assigned by CM15 Y=131.
NOTE: For setting the Authorization Code,
refer to AUTHORIZATION CODE.
Page 86
Assign the access code for Set Relocation. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A196
START
CM12
CM15
CM20
CM2A
CM20
END
JUNE/01/2007
SET RELOCATION