– 473 – NWA-008845-001 Rev.5.0
32ch1008.fm
MESSAGE REMINDER
PROGRAMMING
To provide Message Reminder service for each station:
DESCRIPTION DATA
Select MSG Display on D
term
.(1)
(2)
025
0: MSG (only)
1 : MSGX (X: No. of messages)
To activate Single-Digit Feature Access Code
(1, 2, 3 and 6) feature, set the data for 050, 051,
069 and 148 to “1”.
NOTE: A single digit access code “6” is fix-
edly assigned to set Message Re-
minder.
(1)
(2)
(1)
(2)
(1)
(2)
(1)
(2)
050: * Button as Switch Hook-Flash
1 : Ineffective
051: # Button as Switch Hook Flash
1 : Ineffective
069: Single-Digit Dialing on BT Connec-
tion
1: Step Call
148: Same Last Digit Redialing on BT
Connection
1 : Ineffective
Provide the system with Single-Digit Feature
Access Code on RBT or Voice Call Connec-
tion.
(1)
(2)
156
0: Available
Provide the system with Single-Digit Feature
Access Code on busy Connection.
(1)
(2)
208
0: Available
Provide the system with the automatic cancel
of Message Reminder while the called station
rings.
(1)
(2)
234
0 : Available
1 : Not available
Specify the Automatic Cancel of Message Re-
minder when the desired station answers.
(1)
(2)
235
0 : Available
1 : Not available
Specify the sending of Special Dial Tone for
Attendant Console or station when dialing a
feature access code.
(1)
(2)
236
0 : Tone is not sent
1 : Tone is sent
START
CM08
A
MESSAGE REMINDER
To Next Page
Loading...