Philips Sopho 2000 IPS - Call Transfer; Call Transfer-All Calls

– 174 – NWA-008845-001 Rev.5.0
32ch1003.fm
CALL TRANSFER
CALL TRANSFER-ALL CALLS
PROGRAMMING
To specify the system operation after the C.O./Tie line call (via TRK-B) is completed, when a station that
has a C.O./Tie line call (via TRK-A) on Consultation Hold is talking with another C.O./Tie line call (via
TRK-B):
[Series 3300 software required]
DESCRIPTION DATA
Specify Call Transfer from a station before
called station answers.
(1)
(2)
062
0 : Not available
1 : Available
Specify the duration of sending SPDT after a
hooking operation for Call Transfer.
[Series 3600 software required]
•
(1)
(2)
Y=0
105
10-60 : 10-60 seconds
(1 second increments)
NONE : 15 seconds
DESCRIPTION DATA
When a station that has a C.O./Tie line call (via
TRK-A) on Consultation Hold is talking with
another C.O./Tie line call (via TRK-B), speci-
fy the system operation after the C.O./Tie line
call (via TRK-B) is completed.
(1)
(2)
534
0 : Return to the original call (via TRK-A)
1: ROT
START
CM08
CM41
A
A
CM08
END
JULY/01/2006
CALL TRANSFER
CALL TRANSFER-ALL CALLS