Philips Sopho 2000 IPS - Call Park-Tenant

– 168 – NWA-008845-001 Rev.5.0
32ch1003.fm
CALL PARK-TENANT
PROGRAMMING
HARDWARE REQUIRED
D
term
and DLC card if required
DESCRIPTION DATA
Assign access codes for Call Park-Tenant set/
retrieve.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A062: Call Park-Tenant Set/Retrieve
Specify whether a trunk line placed on Consul-
tation Hold by Call Park-Tenant can be re-
trieved by pressing a trunk line appearance key
on a D
term
.
(1)
(2)
133
0 : Not available
1 : Available
Specify the recall timing for Call Park-Tenant. •
(1)
(2)
Y=0
05
01-98: 4-392 seconds
(4 second increments)
99 : Recall is not performed
If no data is set, the default setting is 60-64
seconds.
Assign Call Park-Tenant Retrieve keys to the
D
term
, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F3XX Z
XX: 00-63: Group No.
Z : 1-8: Serial No.
START
CM20
CM08
CM41
CM90
,
END
CALL PARK
CALL PARK-TENANT