– 507 – NWA-008845-001 Rev.5.0
32ch1008.fm
MULTILINE TERMINAL ATTENDANT POSITION
PROGRAMMING
DESCRIPTION DATA
Assign the My Line number to the required
LEN.
(1)
(2)
000-763: LEN
FX-FXXXXXXXX: My Line No.
Assign the My Line number to the required
LEN.
[Series 3200 R6.2 software required]
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
FX-FXXXXXXXX: My Line No.
Assign Service Restriction Class B for the At-
tendant Position to the required D
term
.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction Class B
Allow the Attendant Position in Service Re-
striction Class B assigned by CM12 Y=02.
NOTE: The Service Restriction Class num-
ber for the Attendant Position
should be different from an ordinary
station.
•
(1)
(2)
Y=71
00-15: Service Restriction Class B as-
signed by CM12 Y=02
0: Attendant Position
Assign the required number of Loop, ICI (In-
coming Call Identification) and OPR (Opera-
tor Call) lines to the Virtual LEN.
NOTE: Usually, ICI/OPR numbers are as-
signed on a per-Attendant-Position-
Group.
(1)
(2)
000-255: Virtual LEN
[Series 3300 software or before]
0000-1019: Virtual LEN
[Series 3400 software or later]
AA X Y: Loop Line No.
X: 0-7: Attendant Position No.
Y: 1-5: Loop No.
AB00-AB99: ICI/OPR Line No.
Assign each Loop Line number assigned by
CM11 as an Attendant Loop Line.
•
(1)
(2)
Y=03
AA01-AA75: Loop Line No. assigned by
CM11
08: Attendant Position Loop Line
Assign Service Restriction Class B for the ICI
key to the required ICI/OPR line numbers as-
signed by CM11.
•
(1)
(2)
Y=02
AB00-AB99: ICI/OPR Line No. assigned
by CM11
XX ZZ
ZZ: 00-15 : Service Restriction Class B
START
CM10
CM14
CM12
CM15
CM11
CM12
A
MULTILINE TERMINAL ATTENDANT POSITION
To Next Page
Loading...