– 508 – NWA-008845-001 Rev.5.0
32ch1008.fm
DESCRIPTION DATA
Allow the ICI/OPE key in Service Restriction
Class B assigned by CM12 Y=02.
NOTE: The Service Restriction Class num-
ber for the Attendant Position
should be different from an ordinary
station.
•
(1)
(2)
Y=73
00-15: Service Restriction Class B as-
signed by CM12 Y=02
0: ICI/OPE key
Assign a Hotline station to each ICI/OPR line
number. With this assignment, each ICI/OPR
line is restricted from call origination.
•
(1)
(2)
Y=03
AB00-AB99: ICI/OPR No.
04: Hotline
Assign a UCD station to each ICI/OPR line
number. With this assignment, ICI/OPR lines
are provided the call-queuing facility individu-
ally.
•
(1)
(2)
Y=1
AB00-AB99: ICI/OPR Line No.
1: Pilot station
•
(1)
(2)
Y=2
AB00-AB09: ICI/OPR Line No.
00-15: UCD Group No.
NOTE: Individual UCD Group number must
be assigned to each ICI/OPR Line
number.
Assign the access code for Priority Call 0 used
for Attendant Position access.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Attendant Position Access Code
A088
Assign the destination of Priority Call 0 to
each OPR line.
•
(1)
(2)
Y=12
00-63: Tenant No.
AB00-AB99: OPR Line No.
Destination of Priority Call 0. (1)
(2)
250
0: Same station as Off Hook Alarm
On the required trunks, assign the destination
of DIT to each ICI line.
•
(1)
(2)
Y=02
000-255: Trunk No.
04: Direct-in Termination
•
(1)
(2)
Y=04
000-255: Trunk No.
AB00-AB99: ICI Line No.
A
CM15
CM12
CM17
CM20
CM51
CM08
CM30
B
MULTILINE TERMINAL ATTENDANT POSITION
To Next Page
Loading...