– 142 – NWA-008845-001 Rev.5.0
32ch1003.fm
CALL FORWARDING-NO ANSWER
PROGRAMMING
To provide Call Forwarding-No Answer with the timer on a system basis set by MAT/CAT, do the follow-
ing programming.
DESCRIPTION DATA
Assign Service Restriction Class A to the
required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Call Forwarding-No Answer in Service
Restriction Class A assigned by CM12 Y=02.
NOTE: When providing Call Forwarding-
No Answer-Outside, set “1” (Allow)
for CM15 Y=10, Y=27, Y=12,
Y=29.
•
•
•
•
(1)
(2)
Y=10 Call Forwarding-No Answer
Y=27 Call Forwarding-No Answer-Out-
side
Y=12 Call Forwarding-Busy Line/No An-
swer
Y=29 Call Forwarding-Busy Line-Outside/
No Answer-Outside
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Call Forwarding-
No Answer, Set and Cancel, respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*6, #6)
A016: Call Forwarding-No Answer Set
A017: Call Forwarding-No Answer Cancel
(1)
(2)
For setting the same access code as Call
Forwarding-Busy Line
X-XXXX: Access Code (*6, #6)
A012: Call Forwarding-No Answer/Busy
Line Set
A013: Call Forwarding-No Answer/Busy
Line Cancel
Specify the timing of Call Forwarding-No An-
swer.
•
(1)
(2)
Y=46
X-XXXXXXXX: My Line No.
0 : As per CM41 Y=0>100, 101 or CME6
Y=07, 08 NOTE
1 : As per CM41 Y=0>01, 15
NOTE: When CME6 Y=07, 08 are set, the timing on a station basis (CME6 Y=07, 08) is effective.
When CME6 Y=07, 08 are not set, the timing on a system basis (CM41 Y=0>100, 101) is
effective.
[Series 3200 R6.2 software required]
START
CM12
CM15
CM20
CM13
A
CALL FORWARDING
CALL FORWARDING-NO ANSWER
To Next Page
Loading...