– 388 – NWA-008845-001 Rev.5.0
32ch1007.fm
FLEXIBLE NUMBERING PLAN
PROGRAMMING
DESCRIPTION DATA
Assign a Numbering Plan Group to each Ten-
ant.
(1)
(2)
00-63: Tenant No.
710-713: Numbering Plan Group 0-3
Specify the number of digits for station num-
bers.
Example: For setting Station No. “2XXX”
(1) 2
(2) 804
NOTE: When the following features are
used with PN-AP00-B with AP00
program, do not assign 5 or more
digit station number.
• SMDR/PMS
• Front Desk Terminal (D
term
)
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X: 1st digit of Station No.
801: 1 digit
802: 2 digits
803: 3 digits
804: 4 digits
805: 5 digits
806: 6 digits
807: 7 digits
808: 8 digits
Assign station numbers to the required LEN
according to the Numbering Plan specified by
CM20. For feature and trunk access codes, re-
fer to the programming of individual features.
(1)
(2)
000-763: LEN
X-XXXXXXXX: Station No.
Assign station numbers to the required LEN
according to the Numbering Plan specified by
CM20. For feature and trunk access codes, re-
fer to the programming of individual features.
[Series 3200 R6.2 software required]
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
X-XXXXXXXX: Station No.
START
CM29
CM20
CM10
CM14
END
FLEXIBLE NUMBERING PLAN
To Next Page
Loading...