– 477 – NWA-008845-001 Rev.5.0
32ch1008.fm
MESSAGE WAITING
PROGRAMMING
Refer to the DSS/BLF Console feature to program the DSS/BLF as a Message Front Station.
DESCRIPTION DATA
Assign Service Restriction Class A for Mes-
sage Waiting to required stations as shown be-
low.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Message Waiting in Service Restriction
Class A assigned by CM12 Y=02.
•
•
(1)
(2)
Y=24 Administrative station allowing
Message Waiting Set/Reset to station
Y=40 Station setting MW
00-15: Service Restriction Class A
0 : Restricted
1 : Allow
Provide each station with Message Waiting.
(D
term
or Single-Line Telephone with Message
Waiting Lamp)
•
(1)
(2)
Y=03
X-XXXXXXXX: Station No.
0: To provide
Assign an Access Code for Message Waiting
Set/Reset/Retrieve.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A040: MW Lamp Control Set
A041: MW Lamp Control Reset
A147: MW Retrieve
Assign the Message Front destination of the
MW retrieve call from the station to which
Message Waiting is set.
By pressing MW Retrieve access code or MW
key on D
term
, the call is routed to the destina-
tion.
•
(1)
(2)
Y=15
00-63: Tenant No. to which MW set D
term
belongs
X-XXXXXXXX: Message Front Station
No./My Line No.
E000 : Attendant Console
START
CM12
CM15
STATION/ADMINISTRATIVE
CM15
Y=24
CM15
Y=40
Station w/o MW Lamp 0 0
Station with MW Lamp 0 1
Administrative station 1 0
CM13
CM20
CM51
A
MESSAGE WAITING
To Next Page
Loading...