Philips Sopho 2000 IPS - Direct Inward System Access (Disa)

– 311 – NWA-008845-001 Rev.5.0
32ch1006.fm
DIRECT INWARD SYSTEM ACCESS (DISA)
PROGRAMMING
DESCRIPTION DATA
Specify the processor for checking the ID code
on DISA.
(1)
(2)
217
0: MP
1 : OAI (ACF)
Assign the ring cadence on a DISA. (1)
(2)
180
0 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
[For North America]
Special Ringing
(See Interval of Ringing Tones by
CM08>392/CM08>396/
CM08>397. Page 337)
[For EU]
1 : As per CM35 Y=33
Assign the data for DISA to the required
trunks.
•
•
•
•
(1)
(2)
Y=02 Terminating System in Day Mode
Y=03 Terminating System in Night Mode
Y=40 Terminating System in Mode A
Y=41 Terminating System in Mode B
000-255: Trunk No.
16: DISA
•
•
(1)
(2)
Y=30 Handling of DISA destination in Day
Mode
Y=31 Handling of busy/not available DISA
destination in Night Mode
000-255: Trunk No.
00 : C.O. line release
01 : Forwarded to TAS indicator
03 : Forwarded to Attendant Console
04 : Forwarded to DIT station assigned
by CM30 Y=04, 05
06 : DT connection for redial
08 : C.O. line release
15 : C.O. line release
START
CM08
CM30
A
NOVEMBER/15/2006
DIRECT INWARD SYSTEM ACCESS (DISA)