Philips Sopho 2000 IPS - Dial by Name

– 259 – NWA-008845-001 Rev.5.0
32ch1005.fm
DIAL BY NAME
PROGRAMMING
(1) Assignment for Soft Key
DESCRIPTION DATA
Specify that the Soft Key feature is available to
each D
term
.
•
(1)
(2)
Y=22
X-XXXXXXXX: My Line No.
0 : Available
Assign Soft Key Pattern number to each D
term
.•
(1)
(2)
Y=23
X-XXXXXXXX: My Line No.
0 : Pattern No. 0
1 : Pattern No. 1
2 : Pattern No. 2
3 : Pattern No. 3
Assign the Dial By Name function to each Soft
Key on idle status of the D
term
.
The LCD shows a maximum of 4 Soft Keys at
once. If assigning more than 4 Soft Keys on
one status, it is necessary to assign Scroll key
at every 4 keys (on 1st through 4th display).
NOTE 1: Scroll key must be assigned as a key
for each active display.
NOTE 2: Help key is only available in Pattern
No. 3.
NOTE 3: For the Pattern No. 3, the initial Soft
Key data for Dial By Name are
assigned as follows:
NOTE 4: Pattern No. 3 is fixed.
NOTE 5: Dial By Name is available only
when the D
term
is in idle state.
•
(1)
(2)
Y=00-03 Soft Key Pattern No. 0-3 assigned
by CM12 Y=23
00 bb
00: Status No. (Idle state) NOTE 5
bb: 00-15: Soft Key No.
00-03: Indicated on 1st display
04-07: Indicated on 2nd display
08-11: Indicated on 3rd display
12-15: Indicated on 4th display
F5002 : Scroll key to change Soft Key
Indication
F5014 : Dial By Name for System Speed
Dialing (300-Slot Memory)
F5015 : Dial By Name for Station Speed
Dialing
F5016 : Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 0)
F5017 : Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 1)
F5018 : Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 2)
F5019 : Dial By Name for System Speed
Dialing (1000-Slot Memory
Block No. 3)
NONE : No data
START
CM12
CM9A
CM9A Y=03
1st Data 2nd Data
0001 F5014
0002 F5015
A
JULY/01/2006
DIAL BY NAME