Philips Sopho 2000 IPS - Station Hunting; Station Hunting-Circular

– 612 – NWA-008845-001 Rev.5.0
32ch1010.fm
STATION HUNTING
STATION HUNTING-CIRCULAR
PROGRAMMING
DESCRIPTION DATA
To set up each Station Hunting group, assign
station numbers, one by one, in order of the
Hunting as shown below.
Example: For setting station number 200,
201, 202 into one Hunting group.
1st Operation (1) 200
(2) 201
2nd Operation (1) 201
(2) 202
3rd Operation (1) 202
(2) 200
•
(1)
(2)
Y=0
X-XXXXXXXX: Station No. to be includ-
ed in Station Hunting
Group
X-XXXXXXXX: Another Station No. to
be linked
Specify the Hunting capability of each station.
To continue the hunt in the original direction,
if the station is busy, set to “1”; to reverse the
direction (last station only), set to “5”.
NOTE 1: The maximum number of stations
per hunt group is 60. And there is no
limit to the number of Circular Hunt
groups within the system.
NOTE 2: Each station can belong to only one
hunt group.
NOTE 3: The Attendant Console cannot be
member of a hunt group.
•
(1)
(2)
Y=1
X-XXXXXXXX: Station No.
1: If busy, hunt in original direction
5: If busy, hunt in reverse direction
Allow or restrict the ability to set Station Hunt-
ing-Circular for a station with Do Not Disturb
set.
(1)
(2)
240
0 : Allow
1 : Restricted
START
CM18
3rd1st
2nd
200
202
201
CM08
END
STATION HUNTING
STATION HUNTING-CIRCULAR