Philips Sopho 2000 IPS - Caller ID Class

– 176 – NWA-008845-001 Rev.5.0
32ch1003.fm
CALLER ID CLASS
PROGRAMMING
(1) Trunk Assignment for CALLER ID CLASS
NOTE: The following data assignment is required when using PN-4RSTC-A/PN-4RSTC.
DESCRIPTION DATA
Specify the Terminating System in Day Mode/
Night Mode/Mode A/Mode B for incoming
calls.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
02 : Trunk-Direct Appearances
03 : Trunk-Direct Appearances + TAS
04 : Direct-In Termination
08 : Dial-in
09 : Automated Attendant
10 : Attendant Console + TAS
11 : Attendant Console + Trunk-Direct
Appearances
12 : Attendant Console + Trunk-Direct
Appearances + TAS
13 : TAS
14 : Attendant Console
16 : DISA
18 : ISDN Indial
31 : DID, Tie Line and any call which is
not handled by the PBX
Assign the type of the trunk route. •
(1)
(2)
Y=00 Kind of Trunk Route
00-63: Trunk Route No.
00: DDD (C.O./DID) trunk
Provide the trunk route with MF Signaling. •
(1)
(2)
Y=37 MF Signaling
00-63: Trunk Route No.
0: Available
Specify the busy/idle status not to be sent to the
network.
•
(1)
(2)
Y=48 Busy/Idle Sending
00-63: Trunk Route No.
0: Not sent
START
CM30
CM35
A
CALLER ID CLASS