– 69 – NWA-008845-001 Rev.5.0
32ch1001.fm
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
PROGRAMMING
DESCRIPTION DATA
Provide the system with Diversion Display. (1)
(2)
204
0: Available
Specify the Incoming Call Identification (ICI)
key to which each LDN call or Tie Line call
from each trunk route will terminate.
•
(1)
(2)
Y=15
00-63: Trunk Route No.
00-07: C.O. Incoming Call 0-7
40-47: Tie Line Incoming Call 0-7
Assign the required number of LDN keys on
the DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6000-F6007: C.O. Incoming Call 0-7
F6040-F6047: Tie Line Incoming Call 0-7
Assign the indialed number to each LDN key
or Tie Line key assigned by CM90. The
indialed number should be different from any
numbers assigned by CM10/CM14 and CM11.
•
(1)
(2)
Y=01 For DID
0 : Effective data in CM35 Y=15
1-8: LDN key 0-7 assigned by CM90
X-XXXX: Indialed No.
•
(1)
(2)
Y=02 For Tie Line
0 : Effective data in CM35 Y=15
1-8: Tie Line key 0-7 assigned by CM90
X-XXXX: Indialed No.
Tenant number of the LDN assigned by CM50
Y=01.
•
(1)
(2)
Y=00
00 : Effective data in CM35 Y=15
01-08: LDN Key 0-7 assigned by CM90
00-63: Tenant 00-63
START
CM08
CM35
CM90
,
CM50
CM58
END
ATTENDANT CONSOLE
DIALED NUMBER IDENTIFICATION SERVICE (DNIS)
To Next Page
Loading...