– 214 – NWA-008845-001 Rev.5.0
32ch1004.fm
CODE RESTRICTION
PROGRAMMING
DESCRIPTION DATA
Provide the system with the Tol1 Restriction
feature for an outgoing call by System Speed
Dialing/Station Speed Dialing, if desired.
(1)
(2)
035: Station Speed Dialing
0: Not provided
1: To provide
(1)
(2)
044: System Speed Dialing
0: Not provided
1: To provide
Provide the system with Toll Diversion or Toll
Denial.
(1)
(2)
119
0 : Toll Diversion (Routed to the “ICPT”
key on the DESKCON)
1 : Toll Denial (Routed to Reorder Tone)
Assign a Trunk Restriction Class to each
station.
•
(1)
(2)
Y=01
X-XXXXXXXX: Station No.
X Z: Trunk Restriction Class
X: 1-8: In Day Mode
Z : 1-8: In Night Mode
1 : Unrestricted (RCA)
2 : Non-Restricted 1 (RCB)
3 : Non-Restricted 2 (RCC)
4 : Semi-Restricted 1 (RCD)
5 : Semi-Restricted 2 (RCE)
6 : Restricted 1 (RCF)
7 : Restricted 2 (RCG)
8 : Fully-Restricted (RCH)
Assign the data for Dial Pulse sending to the
Route number assigned.
•
(1)
(2)
Y=08 Dial Pulse Sending
00-63: Trunk Route No.
3: To send
Provide the Toll Restriction feature to the
required trunk routes.
•
(1)
(2)
Y=11
00-63: Trunk Route No. (00)
0: To provide
Specify outgoing route access capability for
each restriction class.
•
(1)
(2)
Y=51-58
00-63: Trunk Route No.
0 : Restricted
1 : Allow
START
CM08
CM12
CM35
A
CODE RESTRICTION
To Next Page
Loading...