– 559 – NWA-008845-001 Rev.5.0
32ch1009.fm
PERIODIC TIME INDICATION TONE
PROGRAMMING
DESCRIPTION DATA
Provide the system with this feature.
And specify availability of this service on Tie
Line call.
(1)
(2)
135: On outgoing C.O. line call
0: To provide
(1)
(2)
136: On outgoing Tie line call
0: To provide
1: Not provided
Assign Service Restriction Class B for this
feature to required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction Class B
Allow Periodic Time Indication Tone in
Service Restriction Class B assigned by CM12
Y=02.
•
(1)
(2)
Y=61
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
Assign required stations as Ordinary Station.
If assigned to 0 (Analog Data Station), this
feature will not be applied to the station.
•
(1)
(2)
Y=07
X-XXXXXXXX: Station No.
1 : Ordinary Station
Specify the timing interval for Periodic Time
Indication Tone.
•
(1)
(2)
Y=0
09
01-17: 32-548 seconds
(32 second increments)
If no data is set, the default setting is 192-196
seconds.
START
CM08
CM12
CM15
CM13
CM41
END
PERIODIC TIME INDICATION TONE
To Next Page
Loading...