Philips Sopho 2000 IPS - Direct Inward Dialing (DID)

– 297 – NWA-008845-001 Rev.5.0
32ch1006.fm
DIRECT INWARD DIALING (DID)
PROGRAMMING
DESCRIPTION DATA
Assign the ring cadence on a Direct Inward Di-
aling.
(1)
(2)
180
0 : 0.4 seconds ON-0.2 seconds OFF-0.4
seconds ON-2 seconds OFF
[For North America]
Special Ringing
(See Interval of Ringing Tones by
CM08>392/CM08>396/
CM08>397. Page 337)
[For EU]
1 : As per CM35 Y=33 or CM76 Y=22
Assign the trunk numbers to the required LEN. (1)
(2)
000-763: LEN
D000-D255: Trunk No.
Assign the trunk numbers to the required LEN.
[Series 3200 R6.2 software required]
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
D000-D255: Trunk No.
Assign the data for DID to the trunk numbers
assigned by CM10/CM14.
•
(1)
(2)
Y=00 Trunk Route Allocation
000-255: Trunk No.
00-63: Trunk Route No.
•
(1)
(2)
Y=01 Tenant Allocation
000-255: Trunk No.
00-63: Tenant No.
01 : Tenant No.
•
•
•
•
(1)
(2)
Y=02 Terminating System in Day Mode
Y=03 Terminating System in Night Mode
Y=40 Terminating System in Mode A
Y=41 Terminating System in Mode B
000-255: Trunk No.
31 : DID, Tie Line and any call which is
not handled by the PBX
START
CM08
CM10
CM14
CM30
A
NOVEMBER/15/2006
DIRECT INWARD DIALING (DID)