Philips Sopho 2000 IPS - Page 316

– 298 – NWA-008845-001 Rev.5.0
32ch1006.fm
DESCRIPTION DATA
Assign the data for DID to the trunk routes as-
signed by CM30 Y=00.
•
(1)
(2)
Y=00 Kind of Trunk Route
00-63: Trunk Route No.
00: DID trunk
•
(1)
(2)
Y=02 Call direction
00-63: Trunk Route No.
1: Incoming trunk
•
(1)
(2)
Y=05 Release Signal from distant office
00-63: Trunk Route No.
1 : Release Signal arrives
•
(1)
(2)
Y=09 Incoming connection signaling
00-63: Trunk Route No.
06: 2nd DT/Timing Start-Tie Line
NOTE: When 2nd data is set to “1”, the
Trunk ID number assigned by CM30
Y=19 is displayed.
•
(1)
(2)
Y=75 DID incoming LDN display on
D
term
/DESKCON
00-63: Trunk Route No.
0 : Available
1 : Not available NOTE
A
CM35
B
DIRECT INWARD DIALING (DID)