INTRODUCTION
– 1 – NWA-008845-001 Rev.5.0
32ch0001.fm
INTRODUCTION
PURPOSE
This manual explains the feature programming and hardware requirements for each business and hotel ser-
vice feature in the NEAX 2000 IPS.
OUTLINE OF THIS MANUAL
This manual consists of two chapters and three appendixes. The following paragraphs summarize Chapters
1 and 2, and Appendixes A through B.
CHAPTER 1 BUSINESS FEATURES
This chapter explains the programming procedure and hardware requirements for
Business Features in this system.
CHAPTER 2 HOTEL FEATURES
This chapter explains the system outline, system capacity, system specifications,
system programming and hardware requirements for the Hotel System.
APPENDIX A TERMINAL KEY ASSIGNMENT
This appendix contains the key number layout of each D
term
, DESKCON, DSS
Console, and Add-On Module.
Refer to this appendix to assign a key function by CM90 or CM97 in Chapter 1 and
Chapter 2.
APPENDIX B CHARACTER CODE TABLE
This appendix contains the character code table to set a station name displayed on
D
term
or Attendant Console.
JULY/01/2006
PURPOSE/OUTLINE OF THIS MANUAL
To Next Page
Loading...