– 810 – NWA-008845-001 Rev.5.0
32ch2001.fm
MAID STATUS
PROGRAMMING
• When using PN-AP00-B with AP00 program
In addition to the programming of “HOTEL/MOTEL FRONT DESK INSTRUMENT” Page 800 or
“PROPERTY MANAGEMENT SYSTEM INTERFACE” Page 821, do the following program-
ming:
DESCRIPTION DATA
If maid ID Code is used, set the data for 281 to
0.
(1)
(2)
281
0 : Available
1 : Not available
Assign the access code for Maid Status. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A029
Assign the Room Status key to the Front Desk
Terminal.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1069: Room Status
Send Maid Status message to PMS with AP00
on RS-232C when setting Maid Status by guest
room telephones or Front Desk Terminal.
(1)
(2)
119
0: To send
Assign the Service Class number to required
stations, if PMS with AP00 on RS-232C is pro-
vided.
(1)
(2)
X-XXXX: Station No.
0 -15: Service Class No.
Send Room Status Code which includes Maid
Status record, to PMS, if PMS with AP00 on
RS-232C is provided.
(1)
(2)
XX 05: Room Status Code sending to PMS
XX : Service Class No. assigned by
CMD015.
1: To send
Allow Room Status operation set from Front
Desk Terminal to guest stations, if PMS with
AP00 on RS-232C is provided.
(1)
(2)
XX 06
XX: Service Class No. assigned by
CMD015
1: Yes
START
CM08
CM20
CM90
,
CMD000
CMD015
CMD016
A
JUNE/01/2007
HOTEL SYSTEM PROGRAMMING
MAID STATUS
To Next Page
Loading...