– 754 – NWA-008845-001 Rev.5.0
32ch1011.fm
WHISPER PAGE
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A for re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Specify Service Restriction Class A for whis-
pering station and whispered station.
•
•
(1)
(2)
Y=111 Whispering station
Y=112 Whispered station
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0 : Restricted
1 : Allow
Assign the access code for Whisper Page. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access code
A188: Whisper Page
Provide the D
term
(whispering side) with a
Whisper Page key, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0A88: Whisper Page
Specify whether the call termination to My
Line is restricted or allowed, while the station
user makes a call with a Sub Line or trunk line
on the D
term
.
(1)
(2)
268
0 : Restricted
1 : Allow
Specify Busy/Idle status check method as
“Station Base” or “Extension Base”.
NOTE: When CM08>268 and CM08>269
is set to “0”, Whisper Page is avail-
able for the extension which is mak-
ing a call with a secondary
extension or trunk line on the D
term
.
(1)
(2)
269
0 : Station base
1 : Extension base
Specify the dial tone, which is sent to the other
party when the whispered station answers the
Whisper Page.
•
(1)
(2)
Y=2
17
0 : No Tone
1: Hold Tone
START
CM12
CM15
CM20
CM90
,
CM08
CM48
END
WHISPER PAGE
To Next Page
Loading...