– 44 – NWA-008845-001 Rev.5.0
32ch1001.fm
ATTENDANT ASSISTED CALLING
PROGRAMMING
DESCRIPTION DATA
Assign the Access code for an operator call. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (0)
800
Allocate the ATTCON Group number to each
DESKCON.
•
(1)
(2)
Y=00
0-7: ATTCON No. assigned by CM10/
CM14
0-3: ATTCON Group No.
Assign the Master ATTCON within the
ATTCON Group.
•
(1)
(2)
Y=01
0-7: ATTCON No.
0 : Master ATT
1: Not Master ATT
Specify the tenants to be handled by each ATT
Group.
•
(1)
(2)
Y=0-3 ATTCON Group No. 0-3 assigned
by CM60 Y=00
00-63: Tenant No.
0: To be handled
Specify the Attendant access (ATTCON No.
0) capability provided from the stations be-
longing to a tenant with no Attendant Console.
(1)
(2)
142
0 : Allowed
1 : Restricted
Provide the system with Passing Dial Tone. (1)
(2)
048
1 : Available
Provide the system with Attendant Night
Transfer, if required.
(1)
(2)
018
0 : Not available
1 : Available
Specify the Individual Attendant access
capability provided from a station belonging to
a different tenant.
(1)
(2)
143
0 : Restricted
1 : Allowed
START
CM20
CM60
INITIAL
INITIAL
CM62
INITIAL
CM08
END
ATTENDANT ASSISTED CALLING
To Next Page
Loading...