– 315 – NWA-008845-001 Rev.5.0
32ch1006.fm
CALL FORWARDING SET BY DISA
PROGRAMMING
In addition to the DISA programming, do the following programming.
DESCRIPTION DATA
Assign Service Restriction Class A for this fea-
ture to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Manual Call Forwarding set by DISA in
Service Restriction Class A assigned by CM12
Y=02.
•
(1)
(2)
Y=134
00-15: Service Restriction Class A as-
signed by CM12 Y=02
0: Allow
Specify the processor for checking the ID
Code on DISA.
(1)
(2)
217
0: MP
1 : OAI (ACF)
Assign the access code for Call Forwarding-
All Calls, Set and Cancel, respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*5, #5)
A010: Call Forwarding-All Calls Set
A011: Call Forwarding-All Calls Cancel
START
CM12
CM15
CM08
CM20
C
Without ID Code entry when digit
conversion on DID call is not provided
(CM35 Y=18 is set to “1”): Page 318
B
Without ID Code entry when digit
conversion on DID call is provided
(CM35 Y=18 is set to “0”): Page 317
A
With ID Code entry: Page 316
DIRECT INWARD SYSTEM ACCESS (DISA)
CALL FORWARDING SET BY DISA