Philips Sopho 2000 IPS - Day;Night Mode Change by Station Dialing

– 529 – NWA-008845-001 Rev.5.0
32ch1009.fm
DAY/NIGHT MODE CHANGE BY STATION DIALING
PROGRAMMING
DESCRIPTION DATA
Provide the system with Day/Night Mode
Change by Station Dialing.
(1)
(2)
244: Change of Terminating System
Incoming Trunk
0: Available
(1)
(2)
245: Change Trunk Restriction Class
0: Available
Assign the data for terminating system in Day
Mode/Night Mode/Mode A/Mode B, to each
Loop/Ground Start trunk, respectively.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
04: Direct-In Termination
Assign the station number to be terminated by
DIT in Day Mode/Night Mode/Mode A/Mode
B respectively.
•
•
•
•
(1)
(2)
Y=04 Day Mode
Y=05 Night Mode
Y=42 Mode A
Y=43 Mode B
000-255: Trunk No.
X-XXXXXXXX: Station No.
When using Mode A or Mode B, assign the ter-
minating system Mode change.
•
(1)
(2)
Y=29
00-63: Tenant No.
0 : Two kinds of mode (Day Mode, Night
Mode)
1 : Four kinds of mode (Day Mode, Night
Mode, Mode A, Mode B)
Assign Service Restriction B to each station. •
(1)
(2)
Y=02
X-XXXXXXXX: Station No.
XX ZZ
ZZ: 00-15 : Service Restriction Class B
Allow Day/Night Mode Change by Station Di-
aling in Service Restriction B assigned by
CM12 Y=02.
•
(1)
(2)
Y=60
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
START
CM08
CM30
CM65
CM12
CM15
A
NIGHT SERVICE
DAY/NIGHT MODE CHANGE BY STATION DIALING