– 530 – NWA-008845-001 Rev.5.0
32ch1009.fm
NOTE: The following trunk data (CM30) can be changed by this feature (depending upon program-
ming).
Day (Y) Night (Y) Mode A (Y) Mode B (Y)
02 03 40 41
04 05 42 43
13 14
15 16
30 31
DESCRIPTION DATA
Assign the access code for Day/Night Mode
Change by Station Dialing.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (68)
A043: Day/Night Mode Change by Station
Dialing
Assign the Day/Night Mode Change by Tenant
key on the D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1300-F1363: Day/Night Mode Change by
Tenant 00-63
To the key which is set by CM90
Y=00>F13XX, specify the call indicator lamp
control as “not available”.
•
(1)
(2)
Y=05
My Line No. + + Key No.
0: Not available
Assign the Day/Night Mode Change by Tenant
key on the DSS Console, if required.
(1)
(2)
DSS Console No. (00-31) + DSS key No.
(00-59)
F1300-F1363: Day/Night Mode Change by
Tenant 00-63
A
CM20
CM90
,
,
CM97
END
NIGHT SERVICE
DAY/NIGHT MODE CHANGE BY STATION DIALING
To Next Page
Loading...