INTRODUCTION
– 7 – NWA-008845-001 Rev.5.0
32ch0001.fm
AVAILABLE VALUE OF FP/AP NUMBER
For the setting of LEN by CM14, the range of the FP/AP number that must be assigned to the 1st data of
CM14 is valid by the software version you use.
Assign the correct FP/AP number to each FP/AP, referring to the tables below.
[For Series 3200 R6.1 software or before]
×: Available –: Not available
[For Series 3200 R6.2 software]
×: Available –: Not available
FP/AP No.
FP/AP TYPE
00 01-03 04-15 16-19 20-31 32-59 60-63
FP card (PN-CP15) – × – × –––
MP built-in FP × ––––––
DAIA/DAID card – × – × –––
Virtual FP for D
term
IP – × – × –––
AP card – – × – × ––
Virtual AP (Virtual IPT) – – × – × ––
FP/AP No.
FP/AP TYPE
00 01-03 04-15 16-19 20-31 32-59 60-63
FP card (PN-CP15) – × – × –––
MP built-in FP × ––––––
Virtual FP for D
term
IP – ××××––
AP card – – × – × ––
Virtual AP (Virtual IPT) – – × – × ––
AVAILABLE VALUE OF FP/AP NUMBER
To Next Page
Loading...