– 195 – NWA-008845-001 Rev.5.0
32ch1003.fm
CAMP-ON
PROGRAMMING
Camp-On (Transfer Method)
DESCRIPTION DATA
Provide the system with the Camp-On by Sta-
tion feature.
(1)
(2)
146: Automatic Camp-On
0: Available
(1)
(2)
147: Manual Camp-On (Result of Switch
Hook-Flash while hearing Busy Tone)
0: Special Dial Tone allowing use of Camp-
On by Station access code
Assign Service Restriction Class A for Camp-
On to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Camp-On (Transfer Method) in Service
Restriction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=16 Transfer Method
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Specify the Camp-On Tone sent to a busy
station by Camp-On Transfer Method.
(1)
(2)
068
0: Only once
1 : Every 4 seconds
Specify the timing for the Camp-On Recall
Timer.
•
(1)
(2)
Y=0
26
01-15: 8-128 seconds
(8 second increments)
If no data is set, the default setting is 24-32
seconds.
Assign an access code for Camp-On by Station
(Transfer method).
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*2)
A007: Camp-On by Station (Transfer
method)
START
CM08
CM12
CM15
CM08
CM41
CM20
END
CAMP-ON
To Next Page
Loading...