Philips Sopho 2000 IPS - Call Forwarding-Busy Line

– 140 – NWA-008845-001 Rev.5.0
32ch1003.fm
CALL FORWARDING-BUSY LINE
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A for this fea-
ture to the required stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Call Forwarding-Busy Line in Service
Restriction Class A assigned by CM12 Y=02.
NOTE: When providing Call Forwarding-
Busy Line-Outside, set “1” (Allow)
for CM15 Y=11, Y=28, Y=12,
Y=29.
•
•
•
•
(1)
(2)
Y=11 Call Forwarding-Busy Line
Y=28 Call Forwarding-Busy Line-Outside
Y=12 Call Forwarding-Busy Line/No An-
swer
Y=29 Call Forwarding-Busy Line-Outside/
No Answer-Outside
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Call Forwarding-
Busy Line, Set and Cancel, respectively.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*6, #6)
A014: Call Forwarding-Busy Line Set
A015: Call Forwarding-Busy Line Cancel
(1)
(2)
For setting the same access code as Call
Forwarding-No Answer
X-XXXX: Access Code (*6, #6)
A012: Call Forwarding-No Answer/Busy
Line Set
A013: Call Forwarding-No Answer/Busy
Line Cancel
To apply this feature to incoming calls, set the
trunk route combinations for Tandem Connec-
tion.
•
(1)
(2)
Y=05
00-63: Trunk Route No. NOTE
1 : Release signal arrives NOTE
NOTE: For Resident System Programming,
refer to the Command Manual.
•
(1)
(2)
Y=0
Incoming Trunk Route No. + Outgoing
Trunk Route No. assigned by CM35 Y=05
0: Allow
START
CM12
CM15
CM20
CM35
CM36
A
CALL FORWARDING
CALL FORWARDING-BUSY LINE