– 139 – NWA-008845-001 Rev.5.0
32ch1003.fm
HARDWARE REQUIRED
D
term
and DLC card if required
DESCRIPTION DATA
Specify the setting method for Call Forward-
ing-All Calls-Outside.
(1)
(2)
222
0 : Setting when the station goes on hook/
when receiving Service Set Tone
(ORT time out)
1 : Setting when receiving Service Set
Tone (ORT time out)
Assign whether an extension can set a destina-
tion of Call Forwarding-All Calls-Outside by
entering only a trunk access code.
(1)
(2)
386
0 : Restricted
1 : Allowed
Select the trunk route seized for Call Forward-
ing-All Calls-Outside.
(1)
(2)
600
0 : By calling party’s tenant/terminating
trunk’s tenant
1 : By Call Forwarding setting station’s
tenant
Assign Call Forwarding-All Calls keys to the
D
term
s, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0010: Call Forwarding-All Calls Set/
Cancel
Provide Call Forwarding feature to each
tenant as per incoming call type.
•
•
•
(1)
(2)
Y=23 Internal Call or ATT assisted Call
Y=24 C.O. Incoming Call
Y=25 Tie Line Incoming Call
00-63: Tenant No.
1 : Call Forwarding
Select the Dial Tone on setting Call Forward-
ing-All Calls.
•
(1)
(2)
Y=2
13: Dial Tone on setting Call Forwarding-
All Calls
0 : Special Dial Tone (Stutter Dial
Tone)
1:Dial Tone
A
CM08
CM90
,
CM65
CM48
END
CALL FORWARDING
CALL FORWARDING-ALL CALLS
To Next Page
Loading...