– 577 – NWA-008845-001 Rev.5.0
32ch1009.fm
GROUP FEATURE KEY
[Series 3500 software required]
PROGRAMMING
To provide the Group Feature Key for the sub line of D
term
, do the following programming.
DESCRIPTION DATA
Provide Group Feature Key for the sub line of
D
term
, when the D
term
belongs to the group of
stations and accommodates the station num-
ber/My line number of group members to the
D
term
multiline as the sub line.
NOTE: Do not set the second data 0 to the
My line number of D
term
s.
•
(1)
(2)
Y=06
Sub Line No. + + Key No.
0: To provide
1: Not provided
Specify the operation of Group Feature Key on
D
term
when an incoming call/holding call can-
not be seized with My line because it is used by
the other D
term
on multiline.
(1)
(2)
557
0 : Group Feature Key is unavailable
1 : Group Feature Key is available by
seizing Sub line
Specify whether the service which is set to a
group member station is effective when the
group members are called by Group Feature
Key.
[Series 3800 software required]
NOTE: When the second data of
CM08>585 is set to 0, the following
services are effective.
Call Forwarding-All Calls/Split
Call Forwarding-All Calls/Call
Forwarding-All Calls of Mobility
Access/Do Not Disturb/Transfer the
call to station set Do Not Disturb
(CM51 Y=10)/Call Forwarding-Lo-
gout
(1)
(2)
585
0 : Effective
1 : Ineffective
START
CM90
,
CM08
END
NOVEMBER/15/2006
PROPRIETARY MULTILINE TERMINAL
GROUP FEATURE KEY
To Next Page
Loading...