Philips Sopho 2000 IPS - Off-Premises Extensions

– 554 – NWA-008845-001 Rev.5.0
32ch1009.fm
OFF-PREMISES EXTENSIONS
PROGRAMMING
HARDWARE REQUIRED
LLC card
-48 V Power Supply (PZ-PW122)
DESCRIPTION DATA
Assign the station number of Long Line Cir-
cuit (LLC card) to required LEN.
NOTE: The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
(1)
(2)
000-763: LEN
X-XXXXXXXX: Station No.
Assign the station number of Long Line Cir-
cuit (LLC card) to required LEN.
[Series 3200 R6.2 software required]
NOTE: The station number must be as-
signed to the first LEN (Level 0), the
second LEN (Level 1), the third LEN
(Level 2) and the fourth LEN (Level
3) of each LT slot.
(1)
(2)
XX ZZZ: LEN
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
X-XXXXXXXX: Station No.
Assign the Long Line Circuit (LLC card) to the
station number.
NOTE: When using Series 3600 software or
later, a reset of the MP card is not
required.
When changing the data with online,
the data is valid after the LLC card
is unplugged and plugged in with
two seconds or more interval.
•
(1)
(2)
Y=17
X-XXXXXXXX: Station No.
1 : Long Line Circuit (PN-4LLCB)
3 : Short Line Circuit (PN-4LLCB)
Remove the PAD on Off-Premises Extensions. •
(1)
(2)
Y=09
X-XXXXXXXX: Station No.
0: No PAD
START
CM10
CM14
CM12
INITIAL
CM13
END
DECEMBER/02/2005
OFF-PREMISES EXTENSIONS