– 709 – NWA-008845-001 Rev.5.0
32ch1011.fm
TRUNK-DIRECT APPEARANCES
PROGRAMMING
To provide Trunk-Direct Appearances on Analog trunk:
DESCRIPTION DATA
Assign the terminating system for required
C.O. trunks to Trunk-Direct Appearances.
•
•
•
•
(1)
(2)
Y=02 Day Mode
Y=03 Night Mode
Y=40 Mode A
Y=41 Mode B
000-255: Trunk No.
02: Trunk-Direct Appearances
Provide the Trunk-Direct Appearances feature
to the required C.O. trunk assigned by CM30
Y=02.
•
(1)
(2)
Y=18
000-255: Trunk No.
0: To provide
Assign the Trunk-Direct Appearances key to
each D
term
, as required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
D000-D255: Trunk No.
Assign a Hold key for holding the Trunk-Di-
rect Appearances call, to each D
term
, as re-
quired.
By this assignment, the held Trunk-Direct Ap-
pearances call can be transferred by voice call,
and can be answered by the Trunk-Direct Ap-
pearances key on the destination station.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0058: Hold Key
Specify whether a Dial Tone is sent when the
call is held by the Hold key for Trunk-Direct
Appearances (CM90 Y=00>F0058).
(1)
(2)
365
0: To send
1: Not sent
Specify whether Hold Transfer for a trunk line
placed in Consultation Hold is available or not.
(1)
(2)
161
0 : Available (Hold Transfer)
1 : Not available (Consultation Hold)
START
CM30
CM90
,
,
CM08
END
NOVEMBER/15/2006
TRUNK-DIRECT APPEARANCES
To Next Page
Loading...