– 346 – NWA-008845-001 Rev.5.0
32ch1006.fm
DO NOT DISTURB
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class A to the re-
quired stations.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class A
Allow Do Not Disturb in Service Restriction
Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=19
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the group of stations in Do Not Disturb.
Do Not Disturb is set to these stations (as-
signed by this command) simultaneously by
operation from an Attendant Console.
•
(1)
(2)
Y=00
X-XXXXXXXX: Station No.
0: To provide
Assign the access code for Do Not Disturb Set/
Cancel.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code (*8, #8)
A022: Do Not Disturb Set
A023: Do Not Disturb Cancel
Assign the destination of the call when called
station is set to Do Not Disturb.
•
(1)
(2)
Y=10
00-63: Tenant No.
X-XXXXXXXX: Station No.
E000 : Attendant Console
Assign a Do Not Disturb function key to the
D
term
, if required.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0022: Do Not Disturb Set/Reset
F1080: Do Not Disturb Override
Assign Do Not Disturb and Do Not Disturb
Override function keys to the DESKCON.
NOTE: By Resident System Program, a Do
Not Disturb key is assigned as a
Multi-function key, on the
DESKCON.
•
(1)
(2)
Y=00
ATTCON No. (E000-E007) + + Key
No.
F6102: Do Not Disturb
F6103: Do Not Disturb Override
F6104: Reset
F6108: Do Not Disturb Override
START
CM12
CM15
CM13
CM20
CM51
CM90
,
,
A
DECEMBER/02/2005
DO NOT DISTURB
To Next Page
Loading...